Skip to product information
1 of 3

Seal kit

Gaskets are necessary to ensure that the filtration system is watertight.
  • Filtration system seal
  • 1 pre-filter seal
  • 6 replacement handle seals
Regular price 4,00 €
Regular price Sale price 4,00 €
Sale Sold out
Tax included. Shipping calculated at checkout.
Delivery estimated between the 20/07 and the 23/07
  • Seal maintenance

  • 100% silicone

View full details
ORISA® SEALS

Flow performance

The gasket pack contains 1 pre-filter gasket to seal the water inlet when pumping water through the pre-filter.

It also contains 6 spare seals for the handle, 2 of which are permanently required for filtration and 4 of which can be stored in the handle seal reserve for future replacement.

How do I maintain the seals on my ORISA® water purifier?

  • How do I maintain the seals on my ORISA® water purifier?

    To maintain the seals on the ORISA® handle and pre-filter, remove them and apply a small layer of silicone grease to lubricate them and maintain a good seal.

Frequently Asked Questions.

How often should I replace the seals?

There is no set time limit. Durability depends on how you use and maintain your seals. We therefore recommend that you check the condition of your seals and apply silicone grease if they are not sufficiently lubricated. To do this, you can check the seals at the end of the handle, inside the system, by unlocking the handle latch to remove it. Also, when you clean the prefilter regularly with the ORISA® brush, make sure that the seal is still in good condition. If it is not, replace them to keep the filtration system watertight. If the seals are too worn, they can lead to a loss of pressure, affecting the filtration flow rate.

A project, a question? Let us know how we can help.